PRIMER SOLUTIONS

High Build Epoxy Coatings (E8001 – White, E8009 – Gray, EA081 – Activator)

A high performance, epoxy primer designed to cure at low temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Maintains flexibility and toughness better than standard epoxies of this class. Excellent adhesion, sag resistance and corrosion resistance.

Designed for use on tank interiors and exteriors, various storage and containment vessels (steel and concrete). Resists petroleum products (crude, sour crude, diesel fuel, hydraulic fluids, etc.), brine and other salt solutions, detergents and lubricants. Shows good resistance to 20% HCL in the presence of aromatic solvents (Xylene, etc.). Ideal for oil field frac tanks.

High Build Epoxy Lining (E9001 – White, E9003 – Pink, E9009 – Gray).

This high performance, epoxy lining designed to cure at low temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Maintains flexibility and toughness better than standard epoxies of this class. Excellent adhesion, sag resistance and corrosion resistance.

Designed for use on tank interiors and exteriors, various storage and containment vessels (steel and concrete). Resists petroleum products (crude, sour crude, diesel fuel, hydraulic fluids, etc.), brine and other salt solutions, detergents and lubricants. Shows good resistance to 20% HCL in the presence of aromatic solvents (Xylene, etc.). Ideal for oil field frac tanks.

High Build Epoxy Coatings (E6002 – Blue, E6009 – Gray, EA017 – Activator).

This polyamide-cured epoxy is formulated as a high build coating for steel substrates.

Recommended for use on structural steel, tank interiors and exteriors, pipes, concrete floors and concrete block walls. The coating has excellent resistance to a wide range of chemicals. 

Tec-Seal Epoxy Primer (TS140 – Grey, TS143 – Red, TS140A – Activator).

This modified epoxy-polyamide primer is designed for the protection of steel, galvanized steel and aluminum substrates. It features fast dry and good sandability along with excellent corrosion resistance.

Ideally suited for fleet, OEM, or general industrial applications. This primer is designed to be an undercoat for two-component urethanes.

Epoxy Primer Gray Base (LCE1009 with EAFD109 Activator).

This high performance, semi-gloss epoxy designed to cure at ambient temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Excellent adhesion, sag resistance and corrosion resistance.

Designed for use on airport runway systems, steel tanks, trailers, miscellaneous steel, and concrete. Exhibits good adhesion to poorly prepared steel. Resists petroleum products (crude, sour crude, diesel fuel, hydraulic fluids, etc.), brine and other salt solutions, detergents, and lubricants. Shows excellent holdout for 2K urethane topcoats. 

Fast Dry Phenolic Zinc Chromate Primer (P523 – Gray Green).

This universal zinc chromate primer is formulated to provide corrosion protection over aluminum or steel. It has exceptional hiding power and performs best over clean surfaces. This product is free of any lead pigments and driers.

For use wherever a fast dry a fast dry primer is needed for industrial product finishing and refinishing. Due to its phenolic modification, it is suitable under strong solvent topcoats such as epoxy and urethane.

Universal Lead Free Primer (P522 – Black)

This universal lead free primer is designed for industrial product finishing and refinishing. 

High Solids Lead Free Primers (P569 – Red, P581 – White, P583 – Grey).

These products are designed as fast dry, low V.O.C. primers for miscellaneous steel. It consists of an alkyd, lead and chromate free corrosion inhibitors and high solids content to keep these products within current regulatory guidelines.

For use wherever a fast dry primer is needed for industrial product finishing and refinishing. These products are a suitable performance alternate to federal specification TT-P-636 and TT-P-645. 

Our primer solutions offer two key benefits: superior corrosion resistance and optimized drying times. This ensures long-lasting protection for your metal substrates and faster project completion.

TCI Coatings’ primers are formulated with advanced chemicals that create a robust barrier against moisture and other corrosive elements. This helps prevent rust and deterioration, extending the life of your metal structures.

Our fast-drying primers, such as P-569, P-581, and P-583, typically dry within 15-30 minutes when applied under standard conditions. This allows for quicker handling and reduced downtime in your production process.

Yes, our primers are versatile and can be used on a wide range of metal substrates, including steel, aluminum, and galvanized metals. They are designed to adhere well and provide a solid foundation for topcoats.

For our fast-drying primers, we recommend using Xylene as a thinning agent. For AEP-8989 primers, R-140 is the appropriate thinner. This ensures optimal application and performance of the primers.

TCI Coatings is committed to sustainability and offers environmentally friendly options that meet regulatory standards. Our coatings are designed to provide high performance while minimizing environmental impact.

Our team of experts at TCI Coatings can help you select the appropriate product based on your specific requirements, such as the type of metal substrate, environmental conditions, and desired finish. We provide personalized recommendations to ensure optimal performance.

Our coatings can be applied using various methods, including spraying, brushing, or rolling. Detailed application instructions are provided with each product to ensure proper use and maximum effectiveness.

We offer comprehensive support, including technical assistance, troubleshooting, and maintenance advice. Our team is always available to help you get the most out of our coatings and ensure they meet your expectations.